商鋪名稱：大連奈爾孫機電設備有限公司
聯系人：張聰（先生）
聯系手機：
固定電話：
企業郵箱：nellsun_ec@126.com
聯系地址：中山區上海路4號上鼎大廈2107室
郵編：116000
聯系我時，請說是在焊材網上看到的，謝謝！
萊克勒公司(Lechler GmbH)成立于1879年www.nellsun.com公司總部www.nellsun.net設在德國南部著名工業城市斯圖加特附近的麥琴根市。經過一百多年的發展，已經成為全歐洲最大的噴嘴設計和制造商。Lechler產品種類超過2萬種之多，在普通工業、鋼鐵行業、環保以及農業等各個領域都得到廣泛的應用，滿足廣為全世界的冶金、電力、水泥、汽車、食品、化工、電子、農業等各行業提供世界領先技術的各類高技術優質噴嘴產品及相關系統。
燃煤電廠濕法脫硫用噴嘴，要求在非�？量痰墓r（腐蝕性、磨損性）下漿液霧化效果滿足的同時保證較長的使用壽命。為了解決這難題，Lechler開發研制了碳化硅陶瓷材料來制作噴嘴，具有連續運行多年而無明顯磨損的良好效果。Lechler碳化硅陶瓷噴嘴代表了當今噴嘴領域最先進的水平。同時，噴嘴的材料也可以采用Stellite 合金鋼制作。
另外，Lechler的回流噴槍被廣泛應用在干法脫硫等領域。
海鑫和德國Lechler公司已經成功合作了多年, 德國Lechler 是您可靠的合作伙伴, 為您提供卓越的產品和優質的服務：
一. Lechler公司滿足個性化設計生產，根據顧客的工藝需要而進行設計、生產，從而更深入地為顧客服務；
二. 產品具有卓越的液體霧化效果，并有很長的使用壽命；
三. 公司通過ISO9001：2000質量體系認證；
四. 具有良好的售后服務。
Lechler 噴嘴和噴槍在電廠脫硫裝置中已經得到廣泛的應用。在中國，使用Lechler噴嘴的有粵連，安順，夏崗,鴨溪,沙洲,江陰等20多個濕法、干法脫硫項目中。
| 產品名稱 | 產品介紹 | 產品圖片 |
| Flat Jet Nozzles Tips with Dove-Tail (small) |
Alignment with dove-tail Mounting with 3/8" lock nut Spray angle: 20°, 30°, 45°, 60°, 90°, 120° Volume rate at 20 bar: 1,00 l/min to 16,00 l/min (depends on spray angle) Liquid distribution: parabolic (rectangular on request) |
|
| Flat Jet Nozzles Tips with Dove-Tail (large) |
Alignment with dove-tail Mounting with 3/4" lock nut Spray angle: 20°, 30°, 45°, 60°, 90°, 120° Volume rate at 2 bar: 6,30 l/min to 63,00 l/min Liquid distribution: parabolic (rectangular on request) |
|
| Flat Jet Nozzles |
Not aligned Thread: 1/8 BSPT and 1/4 BSPT Spray angle: 20°, 30°, 45°, 60°, 90°, 120° Volume rate at 2 bar: 1,00 l/min to 25,00 l/min (depends on spray angle) Liquid distribution: parabolic |
|
| Flat Jet Nozzles Tips with Dove-Tail and increased Spray Depth |
Alignment with dove-tail Mounting with 3/8" lock nut Spray angle: Width: 70°, 90°, 105° Depth: 20°, 30° and 35° Volume rate at 15 bar: 4,40 l/min to 80,00 l/min Liquid distribution: parabolic or rectangular (even) |
|
| Flat Jet Nozzles Tips |
Not aligned Mounting with 3/8" lock nut Spray angle: 20°, 30°, 45°, 60°, 90°, 120° Volume rate at 2 bar: 1,00 l/min to 25,00 l/min Liquid distribution: parabolic |
|
| Full Cone Nozzles |
Not aligned Thread: 1/8, 1/4, 1/2, 3/8 BSPT Spray angle: 45°, 60°, 90°, 120° Volume rate at 2 bar: 1,00 l/min to 63,00 l/min (depends on spray angle) Foot print: circular |
|
| Full Cone Nozzle with female thread |
Not aligned Thread: 1/8, 1/4, 1/2, 3/8 BSPP Spray angle: 45°, 50°, 65°, 80°, 90° Volume rate at 2 bar: 2,10 l/min to 14,00 l/min (depends on spray angle) Foot print: circular |
|
| Full Cone Nozzles Tips |
Not aligned Mounting with 3/8" lock nut Spray angle: 45°, 60°, 90°, 120° Volume rate at 2 bar: 1,00 l/min to 13,20 l/min (depends on spray angle) Foot print: circular |
|
| Full Cone Nozzles Tips, square |
Not aligned Mounting with 3/8" lock nut Spray angle: 45°, 60°, 90°, 120° Volume rate at 2 bar: 1,00 l/min to 10,00 l/min Foot print: square |
|
| Full Cone Nozzles, square |
Not aligned Thread: 1/8, 1/4, 3/8 BSPT Spray angle: 60°, 75°, 85°, 115° Volume rate at 2 bar: 1,00 l/min to 10,00 l/min (depends on spray angle) Foot print: square |
|
| Tangential Full Cone Nozzles |
Thread: 3/8, 1/4 BSPT Spray angle: 60°, 90°, 120° Volume rate at 2 bar: 1,00 l/min to 16,00 l/min Foot print: circular |
|
| Full Cone Nozzles, square pattern |
Alignment with dove-tail Mounting with 3/8" lock nut Spray angle: 45°/45°,Volume rate at 7 bar: 2,00 l/min to 20,60 l/min Spray angle: 60°/60°,Volume rate at 7 bar: 2,00 l/min bis 26,40 l/min Spray angle: 90°/90°,Volume rate at 7 bar: 2,00 l/min to 33,00 l/min Foot print: oval |
|
| Full Cone Nozzles, oval pattern |
Thread: R1/8, R1/4, R3/8, R1/2 DIN2999 Spray angle min.: spray width: 85°, spray depth: 50° Volume rate at 7 bar: 4,00 l/min to 45,00 l/min Spray angle max.: spray width: 105°, spray depth: 95° Volume rate at 7 bar: 2,50 l/min to 22,60 l/min Foot print: oval |
|
| Full Cone Nozzles, oval pattern |
Alignment with dove-tail Mounting with lock nut Spray angle min.: spray width: 85°, spray depth: 50° Volume rate at 7 bar: 4,00 l/min to 45,00 l/min Spray angle max.: spray width: 105°, spray depth: 95° Volume rate at 7 bar: 2,50 l/min to 22,60 l/min Foot print: oval |
|
| MasterCooler SMART? |
Vertical piping with square pipes Mounted onto vertical adapter plates Spray angle: 50°, 80°, 90°, 110°, 120° Volume rate at 7 bar: 5,70 l/min to 51,1 l/min |
|
| BilletCooler round pattern |
Conventional piping with console Spray angle: 60°, 90° Volume rate at 7 bar: 3,60 l/min to 25,00 l/min Foot print: round (90° to 60°) |
|
| BilletCooler oval pattern |
Conventional piping with console Spray angle: 60°, 90° Volume rate at 7 bar: 3,60 l/min to 25,00 l/min Foot print: oval (90° to 60°) |
|
| MasterCooler |
Conventional piping Nozzle installation requires elbows and fittings for mounting Spray angle: 50°, 80°, 90°, 110°, 120° Volume rate at 7 bar: 5,70 l/min to 51,1 l/min |
|
| SlabCooler |
Conventional piping with console Spray angle: 90°, 130° Volume rate at 7 bar: 5,00 l/min to 65,00 l/mi |
|
| Scalemaster HP |
For highest impact and longest life time Alignment with two flats Mounting with lock nut Spray angle: 22°, 26°, 30°, 40° Nozzle insert made from tungsten carbide Max. pressure: 450 bar Volume rate at 100 bar: 12,00 l/min to 134 l/min |
|
| MiniScalemaster HP |
For highest impact and longest life time at low spray heights Alignment with two flats Mounting with lock nut Spray angle: 22°, 26°, 30°, 40° Nozzle insert made from tungsten carbide Max. pressure: 450 bar Volume rate at 100 bar: 12,00 l/min to 134 l/min |
|
| MicroScalemaster |
Smallest dimensions for space saving mounting Alignment with two flats Mounting with lock nut Spray angle: 22°, 26°, 30°, 40° Nozzle insert made from tungsten carbide or hardened steel Max. pressure: 450 bar Volume rate at 100 bar: 12,00 l/min to 28 l/min |
|
| MiniScalemaster |
Standard nozzle for small spray heights Alignment with two flats Mounting with lock nut Spray angle: 22°, 26°, 30°, 40° Nozzle insert made from tungsten carbide Max. pressure: 450 bar Volume rate at 100 bar: 12,00 l/min to 134 l/min |
|
| Scalemaster |
Standard nozzle Alignment with two flats Mounting with lock nut Spray angle: 22°, 26°, 30°, 40° Nozzle insert made from tungsten carbide Max. pressure: 450 bar Volume rate at 100 bar: 12,00 l/min to 134 l/min |
|
| Series: 666 |
Traditional FUH4 nozzle Alignment with Dove-tail Mounting with lock nut Spray angle: 22°, 26°, 30°, 40° Nozzle insert made from tungsten carbide or hardened stainless steel Max. pressure: 450 bar Volume rat at 100 bar: 12,00 l/min to 134 l/min |
|
| Water Stop Valve |
Stops the water flow at low pressure For Scalemaster series 694 and Scalemaster HP series 682 Opening pressure except MicroScalemaster 8 bar or 14 bar Large free cross section, low impact loss Ideal for plate-, stainless steel and Stecker mills |
|
| Tip extractor |
For damage-free disassembling of the nozzletip For all types of Scalemaster nozzles |
|
| Alignment tip/blank tip |
For alignment of welding nipple before welding For closing of welding nipples for pressure test |
|
| Sealing paste | Avoids galling between lock nut and welding nipple |
|
| Spray headers | AOn request we will design and manufacture complete spray headers |
|
