商鋪名稱：上海歐橋電子科技發展有限公司
聯系人：何（先生）
聯系手機：
固定電話：
企業郵箱：ouqiao.hz@ouqiao.com
聯系地址：
郵編：
聯系我時，請說是在焊材網上看到的，謝謝！
產品選型：
| Model | Description |
| Pulsed IV-Curve Solutions | |
| ES612-2K | ± 10 ~ 2000 |
| ES612-8K | ± 10 ~ 8000 |
| ES612-12K | ± 10 ~ 12000 |
| ES612-20K | ± 10 ~ 20000 |
| HBM-2K | ± 10 ~ 2000 |
| HBM-8K | ± 10 ~ 8000 |
| HBM-12K | ± 10 ~ 12000 |
| HBM-20K | ± 10 ~ 20000 |
| HMM-24K | 3.75 A per 1 kV ≤ ± 10 % |
| ES612 | ES612 ESD Tester, Max 8 kV or 20 kV, RS232 SCPI Supported |
| ES612-HBM | Human Body Model 2 Pin Module |
| ES612-HMM | Human Metal Model 2 Pin Module |
| ES612-MM | Machine Model 2 Pin Tester Module |
| ES62x-PC-HBM | PC with HBM Pulse & Failure Automation Software |
| KSMU2400 | SMU, 200V, 1A, 20W, Single Channel |
| ES62X-CMPS | Compact Manual Probe Station |
| ES62X-XYZM-TIM | XYZ Micropositioner – Inline model, XYZ travel 500 mils with 0.01mm per step |
| ES62X-XYZM-PAA | PCB Probe Arm Assembly with Voltage Measurement |
| ES62X-XYZM-GAA | GND Probe Arm Assembly |
| HBM-TC0.3 | 0.3 mm Pitch Test Clip for Packaged IC Probe |
| HBM-TC2.5 | 2.54 mm Pitch Test Clip for PCB Probing |
| ES62X-XYZM-PP048 | 048 Pogopin for package level Probing |
| ES62X-XYZM-PP075 | 075 Pogopin for PCB level Probing |
| ES62X-XYZM-TN1 | Tungsten Needles – 5 mils sharp tip, for wafer level probing |
| TLP-1010 | ± 10 ~ 2000 |
| TLP-1030 | ± 10 ~ 6000 |
| TLP-1050 | ± 10 ~ 10000 |
| TLP-PIRT | Programable Internal Rise-time Options |
| TLP-MERT | Manual External Rise-time Filter Options |
| TLP-SFT | Slow Fall-time Option |
| TLP-PIPW | Programable Internal Pulse-width Option |
| TLP-MEPW | Manual External Pulse-width Option |
| TLP-ATT | Internal Bidirectional Attenuator (reduce reflections) |
| TLP-RNT | Reverse Negative Termination (reduce negative reflections) |
| ES620-25 | ES620 Compact TLP IV-Curve System, 25 A Base Unit |
| ES620-50 | ES620 Compact TLP IV-Curve System, 50 A Base Unit |
| ES620-100 | ES620 Compact TLP IV-Curve System, 100 A Base Unit |
| ES620-VF | Upgrade Intrinsic TLP rise-time to the faster limit |
| ES62x-PRT4 | Programmable pulse rise-time filter X4 module |
| ES62x-PRT7 | Programmable pulse rise-time filter X7 module |
| ES62x-ERTF | External Rise-time Filter (customizable from 0.1 ~ 50 ns) |
| ES620-MPLEx | Manual Pulse Width External Change Option |
| ES620-PPL4 | Programmable Internal pulse length X4 module |
| ES620-PPL7 | Programmable Internal pulse length X7 module |
| ES620-HBM1 | Human Body Model (HBM) ESD Pulse Module and Measurement Setup Option |
| ES620-HMM1 | Human Metal Model (HMM) ESD Pulse Module and Measurement Setup Option |
| ES620-LVS1 | Low Voltage Surge Pulse Module and Measurement Options |
| ES62X -LTK2400 | Leakage Measurement Options with Keithley 2400 SMU integrated |
| ES62X -LTKSEM | Leakage Test Switch Module for Single Port ESD Injection |
| ES62X -BTK2220 | Programmable Dual Channel DC Supply integrated with TLP for Biasing Control |
| ES62X-BT1 | High Frequency TLP Test Bias Tee, 300 k – 20 GHz, 1A DC Current. |
| ES62X-BT2 | High Current TLP Test Bias Tee, 30K-6GHz, 2A DC Current |
| ES62X-CTX | Overlap-TDR Measurement Setup for Component Test |
| ES62X-VFM | Non-overlap TDR Measurement Setup for High Speed VF-TLP Test |
| ES62X-CMPS | Compact Manual Probe Station with flexible moving vacuum chuck and microscope |
| ES62x-XYZR | Precision XYZ Micro Manipulator Set for probing with 2 coaxial high-resolution 100:1 |
| ES62x-DIFESD | Differential ESD Injection and IV measurement option |
| ES62x-PT1 | Low Frequency Voltage Measurement Pick Tee |
| ES62x-PT2 | High Frequency Voltage Measurement Pick Tee |
| ES62X-OS1000 | Digital oscilloscope with 1 GHz BW, 4CH (Recommended for TLP, HMM, HBM, and surge test) |
| ES62X-OS4000 | Digital oscilloscope with 4 GHz BW, 4CH (Recommended for VF-TLP test) |
| EOS-500 | Model LVS-500 Electrical Overstress Pulse Generator, 0.5 us – 1ms |
| EOS-500+ | Model LVS-500+ Electrical Overstress Pulse Generator, 50ns – 1ms |
| ES62x-PC | Passive current probe, 0.01 V/A |
| KSMU2400 | SMU, 200V, 1A, 20W, Single Channel (For device DC automation failure check) |
| ES62X-CMPS | Compact Manual Probe Station |
| ES62X-XYZM-TIM | XYZ Micropositioner – Inline model, XYZ travel 500 mils with 0.01mm per step |
| ES62X-XYZM-PAA | PCB Probe Arm Assembly with Voltage Measurement (Type C X1, Type B X2) |
| ES62X-XYZM-GAA | GND Probe Arm Assembly |
| ES62X-XYZM-PP048S | 0.35mm diameter, 30-degree gold- plated sharp tip Pogopin for Probing |
| ES62X-XYZM-PP075S | 0.68mm diameter, 30-degree gold- plated sharp tip Pogopin for Probing |
| ES62x-BT2 | Wide band bias tee used to bias TLP and HMM measurements |
| ES62X-PT2 | ES62X-PT2 DC-10 GHz Wideband Voltage Pick-off Tee |
| ES62X-LVS | Model ES62X-LVS Low Voltage Surge System |
| LVS-500-8/20 | Low Voltage Surge 8/20 Module, Max 500V |
| LVS-500-10/1000 | Low Voltage Surge 10/1000 us Module, Max 500V |
| KSMU2400 | SMU, 200V, 1A, 20W, Single Channel (For device DC automation failure check)) |
| ES62X-CMPS | Compact Manual Probe Station |
| ES62X-XYZM-PP048 | 048 Pogopin Probing Tip |
| ES62X-XYZM-PP075 | 075 Pogopin Probing Tip |
| ES62X-XYZM-TN1 | Tungsten Needles – 5 mils Probing Tip |
| TVS-10G | DC-10 GHz Wideband Transient Voltage Suppressor |
| ES62X-SSM | DC-18 GHz System Switch Module |
| ES62x-LTP | Leakage Test SMU ESD Protector |
| ES62X-CKP-0 | Package or PCB Level TLP SOLZ Calibration Kit (Bare PCB Only) |
| ES62X-CKP-1 | Package or PCB Level TLP SOLZ Calibration Kit |
| ES62X-CKW-1 | Wafer Level TLP SOLZ Calibration Kit, 150 μm separation |
| ES62X-CKW-2.1 | Wafer Level TLP SOLZ Calibration Kit, 50 μm separation |
| ES62X-CMPS | Compact manual probe station (Including all 1.x sub items) |
| ES62X-CMPS-TSM | Trinocular stereo microscope including USB camera and LED light |
| ES62X-CMPS-WPS | Flexible manual wafer probe station |
| ES62X-CMPS-MVP | Miniature vacuum pump and accessories |
| ES62X-CMPS-PCB | Magnetic Flexible PCB holder |
| ES62X-XYZM-TxM | 0.7 um resolution micro positioner |
| HVAT-3K6-3.5 | 6 (±1) dB, DC-3.5 GHz, 3kV HV Pulse Attenuator with SMA Connector |
| HVAT-3K20-3.5 | 20 (±1) dB, DC-3.5 GHz, 3kV HV Pulse Attenuator with SMA Connector |
| HVAT-5K6-3.5 | 6 (±1) dB, DC-3.5 GHz, 5kV HV Pulse Attenuator with N-Type Connector |
| HVAT-5K20-3.5 | 20 (±1) dB, DC-3.5 GHz, 5kV HV Pulse Attenuator with N-Type Connector |
| ES613-C20 | 20 (or 30) kV Electrostatic and High voltage Test Controller |
| ES613-C30 | 20 (or 30) kV Electrostatic and High voltage Test Controller |
| ES613-G30 | 20 (or 30) kV ESD Simulator Gun |
| ES613-G20 | 20 (or 30) kV ESD Simulator Gun |
| ES613-CT | Contact Discharge Gun Tip |
| ES613-AT | Air Discharge Gun Tip |
| ES613-RC1 | 150 pF / 330 Ohm RC Module |
| ES613-RC1 | Exchangeable RC Module 150 pF / 330 Ohm +/-10% |
| ES613-RC2 | Exchangeable RC Module 150 pF / 2000 Ohm +/-10% |
| ES613-RC3 | Exchangeable RC Module 330 pF / 330 Ohm +/-10% |
| ES613-RC4 | Exchangeable RC Module 330 pF / 2k Ohm +/-10% |
| ES613-RC5 | Exchangeable RC Module 100 pF / 1500 Ohm +/-10% |
| ES613-RCX | Customized Exchangeable RC Module |
| ES613-FRT | Fast Rise-time Tip |
| ES613-SAT | Spring Loaded Air Discharge Gun Tip |
| ES613-SCT | Spring Loaded Contact Discharge Gun Tip |
| ES614-CP | ESD Simulator Current Probe |
| ES614-AS500 | Air discharge speed control sliding system |
| ES614-ASWS500 | Air discharge speed control work station |
| A4001 | ESD Current Target Calibration Kit |
| A4001-TP | ESD Current Target Plane |
| A4001-TSC | ESD Current Target Shielding Cabinet |
| A4002 | ESD Current Target Adapter Line |
| A4003 | ESD Current Target & Adapter Line Calibration Set |
| ES615-A1 | ESD Test Table |
| ES615-A2 | Vertical Coupling Plane |
| ES615-A3 | Horizontal Coupling Plane |
| ES615-A4 | ESD Test Table Insulation Cover |
| ES615-A5 | Charge Removal Cable |
| ES615-A6 | ESD GRP – Ground Reference Plane |
| A4001-SMA | Gold Plated Wide-band ESD Target with SMA Connector |
| AT2WN-6 | N Type Attenuator, DC-18 GHz, 2W, 6 dB |
| AT2WN-30 | N Type Attenuator, DC-18 GHz, 2W, 30 dB |
| AT2WS-20 | SMA Type Attenuator, DC-18 GHz, 2W, 20 dB |
| RG4-SS-8 | RG400 Coaxial Cable, SMA-SMA Connectors, 0.8 meter |
| A4001-Repair | ESD target repair (will work with other brands ESD Targets) |
| A4001-ReCal | Re-Calibration of ESD Target (NIST Traceable) |
| A4001-TP | ESD Current Calibration Shielding Plane |
| A4001-TSC | ESD Current Calibration Shielding Cabinet with EMI Filter |
| A4002-N | N type connector |
| A4002-3.5 | Precision 3.5mm connector |
| A4002-PN | Precision N type Connector |
| A4001-N | Gold Plated Wide-band ESD Target with N Type Connector |
| AT2WN-20 | N Type Attenuator, DC-18 GHz, 2W, 20 dB |
| AT2WN-30 | N Type Attenuator, DC-18 GHz, 2W , 30 dB |
| RG4-NS-8 | RG400 Coaxial Cable, N-SMA Connectors, 0.8 meter |
| A4001-SMA2BNC | High Precision SMA-BNC Adapter |
| A4001-CAL | NIST Traceable Factory Calibration Report for A4001-Kit |
| A4002-N | Stainless Steel 50 Ohm ESD Current Target Adapter Line with N type Connector |
| A4002-CAL | NIST Traceable Factory Calibration Report for A4002 |
| A4003-SC | A4003 ESD Current Target/Adapter Line Set Storage and Protection Case |
| TN001 | ESD Target_Adapter Line Calibration Method Technical Note |
| TN002 | ESD Current Target Calibration Method Technical Note |
| TN003 | ESD Simulator Calibration Method (IEC61000-4-2 & ***10605) Technical Note |
| ES105-100 | DC ± 1V ~ 100 kV (Auto ranging 1 ~ 19,999 V and 10 ~ 100,000V) |
| ES614-500 | ES614 ESD Air Discharge Motion Controller up to 500 mm/s |
| ES614-WSA | ES614 ESD Air Discharge Work Station Type A |
| ES614-LS | Laptop with LabVIEW RTE and Compiled ES614 Software |
| Cable Discharge Solutions | |
| ES631-G2 | Ethernet Cable ESD test up to 4.0 kV |
| ES631-G2.2 | ± 2 kV |
| ES631-G2.4 | ± 4 kV |
| ES631-AUSB3 | ES613 Charge Cable Adapter for USB |
| ES631-PUSB3 | ES613 DUT Probe for USB |
| ES631-ARJ45 | ES613 Charge Cable Adapter for RJ45 |
| ES631-PRJ45 | ES613 DUT Probe for RJ45 |
| ES631-AHDMI | ES613 Charge Cable Adapter for HDMI |
| ES631-PHDMI | ES613 DUT Probe for HDMI |
| ES631-LAN-SW | LABVIEW Software for ATE test control |
| ES631-LAN-CAL | ES631 CDE System Discharge Waveform Calibration Setup |
| ES631-LAN-C5EUTP200 | 200 meter CAT5E UTP |
| ES631-LAN-C5EFTP200 | 200 meter CAT5E FTP |
| ES631-SW | LABVIEW Software for ATE test control Option for ES631-LAN CDE System |
| ES631-CAL | Discharge Waveform Calibration Option for ES631-LAN CDE System |
| ES631-LAN-C5EUTP200 | 200 meter CAT5E UTP Charge Cable Module |
| ES631-LAN-C5EFTP200 | 200 meter CAT5E FTP Charge Cable Module |
| EMC & RF Solutions | |
| CT-001-B011 | Flat transfer impedance at high frequencies from 1 MHz – 1.2 GHz |
| CT-001-B011-M | Broadband Current Transformer, Metal Case |
| CT-001-B011-C | Insulation Cover for ESD Simulator Measurement |
| CT-001-B011-P | Broadband Current Transformer, Plastic Case |
| CT-002-S | 1 kHz – 4 GHz & 400 Hz – 2 GHz |
| CT-002-S-0p5 | 1 kHz – 4 GHz |
| CT-002-S-0p2 | 400 Hz – 2 GHz |
| CT-005-S-0p5 | CT-002-S .5 V/A broadband current transformer, Metal Case |
| EM602-10 | Mini TEM Cell (DC-10 GHz, 1kV) |
| EM601-6 | IC Stripline TEM Cell (DC-6 GHz, 5kV Pulse) |
| EM605 | Bandwidth 5-15GHz |
| High Voltage Supply Module | |
| HVM-A303.13P24 | 30kV Adjustable Precision High Voltage DC Supply Module |
| HVM-A203.13P24 | 20kV Adjustable Precision High Voltage DC Supply Module |
| HVM-A103.13P12 | 10kV Adjustable Precision High Voltage DC Supply Module |
| HVM-A502.13P12 | Customized Adjustable Precision High Voltage DC Supply Module |
| HVM-A402.13P12 | 4kV Adjustable Precision High Voltage DC Supply Module |
| HVM-A202.52P12 | 2kV Adjustable Precision High Voltage DC Supply Module |
| ES101 | Explosion-proof Electrostatic Voltmeter |
| HVAT-3K Series | High Voltage Pulse Attenuator (DC-3.5GHz, Up to 3kV) |
| HVAT-3K6-3.5 | 6 (±1) dB, DC-3.5 GHz, 3kV HV Pulse Attenuator with SMA Connector |
| HVAT-3K20-3.5 | 20 (±1) dB, DC-3.5 GHz, 3kV HV Pulse Attenuator with SMA Connector |
| HVAT-5K Series | High Voltage Pulse Attenuator (DC-3.5GHz, Up to 5kV) |
| HVAT-5K6-3.5 | 6 (±1) dB, DC-3.5 GHz, 5kV HV Pulse Attenuator with N-Type Connector |
| HVAT-5K20-3.5 | 20 (±1) dB, DC-3.5 GHz, 5kV HV Pulse Attenuator with N-Type Connector |
| ES105 | High-impedance High-voltage Meter |
| ES105-100 | DC ± 1V ~ 100 kV |
| ES813-30.1 | Precision ES/HV Generator |
| ES813-50.1 | Precision ES/HV Generator |
| ES813-20.1 | Precision ES/HV Generator |
