1. The shell is made of diecasted Al-alloy of welded of steel plates;
2. Inside will be installed ABB or Schneiders solid soft starter,
which increase voltage step by step to flatly start;
3. It shall select the starting mode from normal type and heavy loaded
type according to load characteristics, starting parameter
can be self-set.
4.Suitable for GB3836-2000、IEC60079, GB12476.1-2000、IEC61241
standard request.

1. 外殼采用鑄鋁合金或鋼板焊接而成；
2. 內裝ABB或施耐德等公司生產的固態軟起動器，采用逐步升壓
的方法，實現平滑起動；
3. 可根據負載特性選用常規起動和重載起動，起動參數可自行設
定。
4. 符合GB3836-2000、IEC60079, GB12476.1-2000、IEC61241
標準要求。